McIntosh MR89

The MR89 features exclusive McIntosh radio frequency (RF) circuitry that is capable of receiving both strong FM signals from nearby stations – something that can overload and cause distortion in lesser tuners – while also being able to tune in weaker FM signals located further away with little to no noise. The MR89's advanced signal quality monitor can display detailed signal, multipath, and noise levels of the incoming RF signals to help fine tune optimal placement of your AM or FM antenna. It comes with our RAA2 AM antenna that features a 20-foot (6m) long cable that provides flexibility in placing the antenna for the best possible radio signal reception; your McIntosh dealer will be able to assist you in choosing the correct FM antenna based on your home's location relative to your favorite FM stations. A pair of balanced and unbalanced analog outputs along with one each of digital coax and optical outputs are included to connect the MR89 to your home audio system.

A multitude of advancements have been made in the MR89 to make your radio listening more pleasurable. Sensitivity, Signal to Noise Ratio, Harmonic Distortion, Channel Selectivity, and Stereo Separation were thoroughly analyzed and thoughtfully updated resulting in substantial performance improvements for each. A variety of new features have also been added. To help with lower quality FM stereo broadcasts, Stereo Blending has been upgraded with the introduction of a new High Blend option which blends the high frequency portion of the audio frequency range more aggressively. The new Softmute feature reduces audio output when receiving low quality stations or between-station static and noise. Another added method to reduce noise and enhance your listening experience is the new Highcut function that reduces high frequency audio content. Several aggressiveness settings are available for Stereo Blending, High Blend, Softmute, and Highcut to suit station quality and your listening preferences. AM and FM radio stations are tuned using the smooth acting tuning knob. The MR89 supports the FM Radio Broadcast Data System (RBDS)1, allowing the display to show various information such as station name, music genre, artist name, and song title (provided such data is transmitted by the station). The RBDS data display can be adjusted or turned off entirely according to your liking. A Seek function is available through either the front panel controls or from the included remote control. The sensitivity of the Seek function is adjustable through setup menus. The MR89 can store up to 20 preset stations in both the AM and FM band.

A pair of 60dB output meters show the signal level that's being delivered from the analog outputs of each channel. While the volume is controlled by your preamplifier, integrated amplifier, or other control device, the meters on the MR89 accurately portray the Left and Right channel audio output generated from the received station. Depending on the program received, the meters are a good indication of the MR89’s excellent stereo separation. The MR89 can receive the following FM frequencies that are used in the listed regions as well as in many other parts of the world: 87.5MHz – 108.0MHz (Europe); 88.1MHz – 107.9MHz (USA); and 76.0MHz – 108.0MHz (Japan). For AM reception, it can receive 531kHz – 1701kHz (Europe); 530kHz – 1700kHz (USA); and 531kHz – 1629kHz (Japan).

The black glass front panel, meters, knobs, and brushed aluminum end caps are all housed in a stainless-steel chassis polished to a luxurious mirror finish that imparts the timeless McIntosh look. The MR89 can be paired with a variety of amplifiers, turntables, CD players, home theater processors, room correction devices, speakers, and other source components to make a complete home audio system.