®®paypayPowered byPowered by
Category Title

SME Series M2-10


Condition: New
Warranty: 2 Years
Colour: Black
HTFH Cat. No.: EB353
  • SME - probably the best tonearms in the world
  • Detachable magnesium headshell with azimuth adjustment
  • A level of stiffness and rigidity to suit all types of cartridge
  • Pressure die-cast in magnesium for lightness and rigidity
  • 10" Version of the M2-9 tonearm
£1,680.00 Each

Be the first to review this product

Order Before 2.30pm to Get Between 3-5 Working Days with FREE shipping (UK only)

SME Series M2-10
SME Series M2-10


These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge.

These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.

The M2 shell is pressure die-cast in magnesium for lightness and rigidity.

Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks.



The internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.


A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening. 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator. 220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control. Low friction, fully shielded races for both axes. Sliding base for tracking adjustment. Thumbwheel height adjustment. Traditional pattern anti-skate.

Technical Specification

SME Series M2-10

Series M2-10 Dimensions

A – Distance from pivot to stylus     239.30mm

B – Distance from pivot to turntable centre     222.0mm

C – Cartridge fixing centres     12.70mm

F – Overhang     17.30mm

G – Height above mounting surface     87.0mm max - 63.0mm min
*Note: Spacer P1, part no. 3823/IV is required when the turntable surface
is more than 41.30mm above the surface on which the arm is mounted             

H – Height of record surface above mounting surface     67.40mm max - 43.40mm min

J – Depth below mounting surface     46.0mm

K – Radial clearance for balance weight     51.0mm
+ – Tracking adjustment     12.70mm

2 Years
Model Number
Series M2-10


Only registered users can write reviews. Please, Sign in or create an account