®®paypayPowered byPowered by

Grado Opus3

Moving Coil Cartridge & Stylus

Condition: New
Warranty: 1 Year
Colour: Maple
HTFH Cat. No.: EB1573
  • Extreme levels of clarity over the full frequency range
  • A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal
  • Absolutely no stridency or shrillness
  • Hand-built in Brooklyn
  • Your choice of 4.0mV MM or 1.0mV MC versions - contact us for details
£265.00 Each

Be the first to review this product

Order Now For Delivery Within 30 Days

Grado
Grado Opus3
Grado Opus3

Overview

Bringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges.

Features

Oh, what could be. Bridging the Gap

The Opus3 was built specifically to bring the entry-level and the mid-range phono cartridges closer together, creating an even tighter ecosystem of cartridges. We worked on the Opus3 knowing we wanted to have a cost-effective wooden cartridge while at the same time taking advantage of the techniques and processes used in the higher-end models. If taking a step up in your turntable setup is on your to-do list, start here.

An Achievement. First of its Kind

When it comes to the Opus3, there are a few “firsts”. This is the first cartridge built with a maple wood housing, as well as the first to use what we learned with our high-end cartridges at such an entry-level price. The housing is a new shape but still keeps the wood working in tandem with the cartridge inside. This is also the first cartridge built specifically with the Timbre Series in mind.

In the Details. Extreme Precision

Grado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.

The Sound of Wood. Built from Maple

The Opus3 is nestled inside a maple housing, something a cartridge has never done before. After years of working with maple from our Heritage and Statement Series headphones, we knew it was time to bring it to a turntable. Maple produces a vibrant and luscious sound, while staying consistent and clear. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.

With Love. Hand-Built in Brooklyn

Each Opus3 is hand-built by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Opus3 steady and producing the Grado signature sound. We started building cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Opus3.

Technical Specification

Grado Opus3

Body: Maple Wood
Cantilever: Aluminum / Elliptical Diamond
Output:
High 4.0mV @5 CMV (45)
Low 1.0mV @5 CMV (45)
Inductance:
High Output 55mH
Low Output 6mH
Resistance:
High Output 660 ohms
Low Output 70 ohms
Input Load: 10k-47k ohms
Cartridge Weight: 8 grams
Tracking Force: 1.6-1.9 grams
Compliance: 20μm/mN
Channel Seperation: Average 30db - 10-30k Hz
Controlled Frequency Response: 10-60 kHz
Non-Sensative to Capacitive Load
Builds: High Output, Low Output, Mono

Warranty
1 Year
Manufacturer
Grado
Model Number
Opus3
Colour
Maple
Weight (Each)
8g
Voltage
n/a