Brooklyn Bridge is identical to Brooklyn DAC+ in terms of audio circuits and performance but has the addition of a built-in Network Streamer. AES/EBU digital input is replaced with an ethernet network connector, a WiFi antena and a USB port for external music hard drive. Just add a tablet (ipad or android) for complete music system to stream Tidal MQA, Qobuz Hi-Res or other streaming services or play local files connected to Brooklyn Bridge USB port. Roon requires additional Roon Core. Like in the Brooklyn DAC+ there is line and phono analog preamplifier and a reference headphone amplifier.
Brooklyn AMP is a reference power amplifier with signature Mytek sound.- musical, detailed and transparent. Its dual mono design breaks the sound quality spell associated with Class D and proves a well executed Class D circuits can challenge the best Class A and sound amazing. Amplifier is packaged in miniature 1/2 rack enclosure and it's small enough to fit in a briefcase, yet powerful to drive the largest speaker systems. It's designed to be used as regular stand alone power amplifier or to complement Brooklyn DAC for complete modern digital streaming and vinyl playback system. Brooklyn AMP is another brand new, amazing sounding product from Mytek, launched at 2017 Munich HiFi Show. Mytek golden ear expertise was used to design world’s most likely best sounding Class D amplifier. Mytek engineers with the lead designer, Michal Jurewicz, have demonstrated that a carefully executed Class D can sounds like triode, with beautiful midrange and depth while maintaining deep bass and fast transient and detail. Mytek extensive expertise with DSD, technology similar to digital amplifiers was used in this project. This architecture allows for packing a lot of power (300W/ch) into small 1/2 rack chassis, small and light enough to be carried around in a briefcase.
Mytek Brooklyn Bridge -
CONVERSION: up to 384k, 32bit PCM, native DSD up to DSD256, DXD, 130dB DR, ES9028PRO chipset
MQA HI-RES DECODER: built in certified hardware MQA™ decoder, full unfold to original sample rate
NETWORK INPUTS: Ethernet CAT5 (PCM up to 24/192k, DSD64 , WiFi (PCM up to 24/192k, DSD64)
DIGITAL INPUTS: USB2 Class2 (OSX, Linux driverless, all formats up to 384k), 2x S/PDIF (PCM up to 24/384k, up to DSD128 DOP), Toslink (up to 24/176k, DSD64 DoP)
CLOCK: “Mytek Femtoclock Generator™” 0.82ps internal jitter.
ANALOG OUTPUTS: RCA, balanced XLR, simultaneous, 75 Ohm impedance
HEADPHONE OUTPUTS: Reference High Current,
High transient Headphone Amp, 500mA, 6 Watts, dual headphone jacks, designed to drive hard to
BUILT-IN ATTENUATOR: Choice of 1dB step analog attenuator, separate for main out and head-phones,
1dB step digital 32 bit attenuator and purist relay bypass.
BUILT-IN ANALOG PREAMP: Line level input or Phono M/M, M/C input, relay controlled.
AUDIO INTERFACE FUNCTION: All digital inputs can be routed into computer via USB2. Allows connection
of external digital sources such as CD Players and digitizing ADCs.
REMOTE: Included, universal remote capable
Mytek Brooklyn Amp -
Power ratings at 1% THD:
at 16 Ohm - dual mono 2 x 130 W
at 8 Ohm - dual mono 2 x 250 W
at 4 Ohm - dual mono 2 x 300 W
at 2 Ohm - dual mono 2 x 400 W
Peak - dual mono 2 x 1200 W
70 Vp / 140 Vpp (unloaded)
SNR: >121 dB
Frequency Response-3dB: 10Hz - 30kHz
THD Regular use: <0.01%
Protection Circuitry: Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
Damping Factor: >400
DC Power On Trigger: 12VDC minijack
Power: 100-240V AC 50/60 Hz