Based on our latest generation Hyper interconnect, the Hyper Integra Tonearm cable is available with the choice of either a right-angle (90°) or straight (180°) entry 5 pin connector.
An extremely low noise cable ideally suited to the very low signal output levels of phono cartridges.
Hyper Integra Tonearm uses an OCC (Ohno Continous Casting) high purity copper conductor with foamed Polyethylene dielectric, combining to offer a sophisticated, evenly balanced sound which draws you into the musical performance.
The cable is fitted with our self-cleaning (just remove and insert it to clean the contact areas) Integra RCA plug and integrated spade tag earth terminal. The low-mass Integra connector features a solder-free, cold-weld connection, optimised to create a coherent, continuous signal path.
The 5 pin tonearm plug is precision-turned and hard gold-plated with FEP insulation. Cable entry is from either the side (right angle entry) or from the base (straight entry), please specify when ordering.
The Integra is a low-mass, non-compression, constant impedance, self-cleaning, solder-free construction RCA plug.
OCC (Ohno Continuous Casting) process was developed by Professor Ohno, from the Chiba Institute of Technology, to manufacture a very high purity single grain copper or silver. There are only a handful of companies in the world manufacturing via this method.
FEP (Fluorinated Ethylene Propylene) has a big advantage over PTFE in that it can be applied to sophisticated conductors at lower temperatures, preserving the integrity of the base material.
Central conductor (signal path) surrounded by dielectric material encased within a circular conducting screen which acts as the signal return path.
Construction Twin Co-ax
Conductor OCC Copper
Conductor Resistance 0.123 Ohms/m at 20°C
Capacitance 121.95 pF/m
Inductance 0.306 µH/m
Outside Diameter 5.0mm