The latest generation Hyper Integra offers a sophisticated, evenly balanced sound which draws you into the musical performance.
A stereo interconnect with a high level of transparency, ideally suited to improving mid-level systems.
Hyper utilises an OCC (Ohno Continous Casting) high purity copper conductor with a PEF (Foamed Polyethylene) dielectric, This design and construction combines wide bandwidth with excellent resistance to RFI (Radio Frequency Interference), which can raise noise levels, resulting in a loss of low level detail, in a poorly shielded cable, The Hyper Integra is fitted with our self-cleaning (just remove and insert it to clean the contact areas) Integra RCA plug. The low-mass Integra connector features a solder-free, cold-weld connection, optimised to create a coherent, continuous signal path.
The end result is a natural-sounding interconnect which achieves a large open soundstage and fine levels of resolution without any sense of exaggerated ‘detail’ which is superficially impressive but quickly fatiguing to listen to.
The Hyper range includes DIN & XLR termination options, digital interconnects plus stereo & bi-wire speaker cables.
The Integra is a low-mass, non-compression, constant impedance, self-cleaning, solder-free construction RCA plug.
OCC (Ohno Continuous Casting) process was developed by Professor Ohno, from the Chiba Institute of Technology, to manufacture a very high purity single grain copper or silver. There are only a handful of companies in the world manufacturing via this method.
PEF (Foamed Polyethylene). The foaming process uses a blowing agent, of which there are two types. Atlas use the gas-foamed method which creates a more inert, consistent and higher quality product.
Central conductor (signal path) surrounded by dielectric material encased within a circular conducting screen which acts as the signal return path.
Material 6n OCC Copper
Screen OFC 94.2% – 252 strands
Capacitance 71.54 pF/m
Inductance 0.542 µH/m
Resistance 0.0239 Ohms/m
Outside Diameter 9.0mm