®®paypayPowered byPowered by
Category Title

Audio Technica AT-MONO3/LP

Mono Moving Coil Cartridge & Stylus

Condition: New
Warranty: 2 Years
Colour: Silver
HTFH Cat. No.: EB441
  • High resolution cartridge
  • Straight pipe aluminium cantilever
  • 500 hours usage time extending the life span of precious mono recording
  • High purity PCOCC
  • Rigid synthetic resin to hold the body
£170.00 Each

Be the first to review this product

Order Before 2.30pm to Get Between 3-5 Working Days with FREE shipping (UK only)

Audio Technica
Audio Technica AT-MONO3/LP
Audio Technica AT-MONO3/LP


Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.

Carefully selected components and state of the art technology produce a high resolution cartridge.
Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.
The average usage time is 500 hours extending the life span of precious mono recordings.
High purity PCOCC allows a more transparent signal transmission both high efficiency and high fidelity.
To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.

Technical Specification

Audio Technica AT-MONO3/LP

Type     Horizontal Mono Moving Coil
Mounting     1/2” centers
Frequency Response     20 - 20,000Hz
Body Material     Aluminium/Synthetic Resin
Output Voltage     1.2 mV (at 1 kHz, 5.0 cm/sec)
Vertical Tracking Angle     23°
Vertical Tracking Force Range     1.5 to 2.5 g (standard 2.0 g)
Stylus Shape     Conical
Stylus Construction     0.6 mil
Cantilever     Aluminium Pipe
Coil Impedance     40Ω (1kHz)
Coil Inductance     190 µH (1kHz)
DC Resistance     40Ω
Static Compliance     20×10-6cm/dyne
Dynamic Compliance     7×10-6cm/dyne (100Hz)
Recommended Load Impedance     400 to 47,000 ohms
Dimensions     16.0 (H) x 16.6 (W) x 26.5 (L) mm
Replacement Stylus     When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
Accessories Included     Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101

2 Years
Audio Technica
Model Number
Weight (Each)


Only registered users can write reviews. Please, Sign in or create an account